2024 Toro Groundsmaster® 4100 Series 4110-D (30644)
- Year 2024
- Make Toro
- Model Groundsmaster® 4100 Series
2024 Toro Groundsmaster® 4100 Series 4110-D (30644)
The Groundsmaster® 4110-D wide area rotary mower features an all out-front mower deck for superior operator visibility and increased productivity. This Tier 4 compliant model offers a powerful and efficient Yanmar® turbo-diesel, 55 hp (41 kW) engine and SmartPower™ technology that coupled with the HybridDrive™ cutting deck system delivers optimal power to the cutting blades – efficiently cutting grass even in the toughest conditions. The Groundsmaster 4110-D includes a 10.3' (3.15 m) cutting width, full-time bi-directional four-wheel drive and a SmartCool™ auto-reversing fan that minimizes radiator screen clogging. Operators will enjoy the convenience of a climate-controlled safety cab in the Groundsmaster 4110-D.
Features may include:
Major Mowing Capacity- The Groundsmaster® 4100-D/4110-D delivers 55 hp (40.2 kW) and 125 ft.-lbs (169 Nm) torque at 2000 rpm. With so much power at your disposal, it's easy to digest even a large amount of wet, thick grass. With its unmatched engine torque and patented hydraulic motors that directly drive spindles on each deck, the 4100-D/4110-D delivers power where you need it most to cut tough grass. Plus, the shallow deck design forces quicker clipping dispersal, allowing the decks to accept more grass on a faster basis.
- Variable speed, temperature actuated reversing fan. Blows chaff off intake screen to help reduce overheating. Big time saver which reduces that amount of times an operator has to stop and exit the unit to clean the back hood.
- The impressive trimming capability means you can get around even the smallest object. The rare ability to mow a 0" uncut circle - without wheel brakes - allows you to easily mow striping patterns without leaving any grass uncut. Smooth turning is made possible by a tight 55.5" (141 cm) wheelbase and an inner, rear-steering turning angle of 53.5 degrees.
- Designed with a patented parallel hydraulic traction system it contains hydraulic flow between the front and rear wheels, assuring full-time 4-wheel drive in forward and reverse for mowing around objects on challenging hils with confidence. Weight transfer system or counter-balance that improves the cutting deck's ground following performance and the mower's hill climbing traction capability.
- In addition to effectively mowing a 54" to 10.5' swath, the Groundsmaster® 4100-D/4110-D offers incredibly tight trimming capabilities. It allows you to trim how you want with one, two, or all three decks engaged, depending on the situation. The 4100-D/4110-D also features a unique, patented, parallel hydraulic traction system in forward and reverse that makes it much easier to trim around a tree or object without scuffing even while traversing a hill.
Engine
Engine Manufacturer
Yanmar®
Cylinder Liners
4-cylinder
Engine Power
55 hp (41 kW)
Engine Torque, Maximum
125 ft.-lbs. (169 Nm) torque at 2,000 rpm
Displacement
127 cu. in. (2.1 liter)
Emissions
EPA Tier IV Final and Stage V compliant
Cooling
Liquid Cooled
Starter
Key Start
Air Filter
Dry, replaceable primary and safety elements
Drivetrain
Steering
Power steering with dedicated power source. Steering wheel tilts to desired operator position.
Drive System
4WD
Fuel System
Fuel Type
Diesel / Biodiesel
Battery
Battery
12V
Electric
Electrical
System: 12-volt, 690 cold cranking amps battery, 80 amp alternator. Overload protection with automotive type fuses.
Wheels & Tires
Tires, Front Specification
26" x 12" - 12", 6-ply, Tubeless Multi-Trac
Tires, Rear Specification
20" x 10" - 10", 6-ply, Tubeless Multi-Trac
Operational
Operating Conditions
Mowing Rate (Productivity): Up to 10.3 acres/hr (4.2 hectacres/hr)
Operating Speed
Ground Forward / Reverse: 0 - 16.2 mph (0 - 26.1 km/h) / 0 - 8.1 mph (0 - 13 km/h) | Mowing: 0 - 8.3 mph (0 - 13.4 km/h)
Chassis
Frame Type
All welded formed-steel frame with integral tie-down anchors
Dimensions
Dimensions
Ground Following: 6" anti-scalp cups on each blade, adjustable skids, 3 anti-scalp rollers on front deck and 1 on each wing. | Cutting Unit Type/Configuration: Overall - 132" (335 cm), Front - 62" (157.5 cm), Wings - 42" (106.7 cm), Overlap - 7" (12.8 cm)
Ground Clearance
6.5" (16.5 cm)
Height
85.3" (216.7 cm) with ROPS up 93.3" (237 cm) with cab | of Cut: 1" - 5" (25 mm - 127 mm) in 0.5" (13 mm) increments
Length
144" (366 cm) with decks down
Overall Width
127" (323 cm) with decks down
Transport Width
71" (180 cm) @ 2" (5 cm) HOC
Wheelbase
55.5" (140 cm)
Cutting Width
132" (335 cm)
Spindle Diameter
diameter spindle shafts: 1.25" (3.17 cm) | diameter conical ductile iron housing, and 2 greaseable tapered roller bearings: 9" (22.9 cm)
Capacities
Fuel Capacity
21 U.S. gal. (79.5 L)
Hydraulic Capacity
8.75 U.S. gal. (33.1 L)
Oil capacity
8 U.S. qt. (7.6 L)
Weights
Weight
4890 lbs. (2218 kg) with full fluids
Features
Features
Blade Style/Type: Rotary | Number of Blades: 7 | Hydraulic Fluid Type: Toro PX™ Extended Life Hydraulic Fluid
Construction Material, Deck
Welded 0.100" (2.5 mm) high-strength steel with steel 7 and 10-gauge channel and plate reinforcements
Cooling System
Description: Single pass cooler, 6.3 fins per inch, Smart Cool™ variable speed radiator cooling fan with automatic (based on coolant and oil temps) and manual reversing capabilities.
Seat Type
4-way adjustable seat, right armrest travels with seat and suspension.