2024 Toro Groundsmaster® 4100 Series 4100-D (30608)

2024 Toro Groundsmaster® 4100 Series 4100-D (30608)

Swipe to View More

  • Year 2024
  • Make Toro
  • Model Groundsmaster® 4100 Series
2024 Toro Groundsmaster® 4100 Series 4100-D (30608)

2024 Toro Groundsmaster® 4100 Series 4100-D (30608)

2024 Toro Groundsmaster® 4100 Series 4100-D (30608)

The Groundsmaster® 4100-D wide area rotary mower features an all out-front mower deck for superior operator visibility and increased productivity. This Tier 4 compliant model offers a powerful and efficient Yanmar® turbo-diesel, 55 hp (41 kW) engine and SmartPower™ technology that coupled with the HybridDrive™ cutting deck system delivers optimal power to the cutting blades – efficiently cutting grass even in the toughest conditions. The Groundsmaster 4100-D includes a 10.3' (3.15 m) cutting width, full-time bi-directional four-wheel drive and a SmartCool™ auto-reversing fan that minimizes radiator screen clogging. Operators can enjoy mowing productivity with ROPS safety in the open-air 4100-D.

Features may include:

Major Mowing Capacity
  • The Groundsmaster® 4100-D/4110-D delivers 55 hp (40.2 kW) and 125 ft.-lbs (169 Nm) torque at 2000 rpm. With so much power at your disposal, it's easy to digest even a large amount of wet, thick grass. With its unmatched engine torque and patented hydraulic motors that directly drive spindles on each deck, the 4100-D/4110-D delivers power where you need it most to cut tough grass. Plus, the shallow deck design forces quicker clipping dispersal, allowing the decks to accept more grass on a faster basis.
Nimble Maneuvering
  • The impressive trimming capability means you can get around even the smallest object. The rare ability to mow a 0" uncut circle - without wheel brakes - allows you to easily mow striping patterns without leaving any grass uncut. Smooth turning is made possible by a tight 55.5" (141 cm) wheelbase and an inner, rear-steering turning angle of 53.5 degrees.
Full-time Bi-Directional 4WD
  • Designed with a patented parallel hydraulic traction system it contains hydraulic flow between the front and rear wheels, assuring full-time 4-wheel drive in forward and reverse for mowing around objects on challenging hils with confidence. Weight transfer system or counter-balance that improves the cutting deck's ground following performance and the mower's hill climbing traction capability.
SmartCool™ System with Auto-Reversing Cooling Fan
  • Variable speed, temperature actuated reversing fan. Blows chaff off intake screen to help reduce overheating. Big time saver which reduces that amount of times an operator has to stop and exit the unit to clean the back hood.
Superb Trimming
  • In addition to effectively mowing a 54" to 10.5' swath, the Groundsmaster® 4100-D/4110-D offers incredibly tight trimming capabilities. It allows you to trim how you want with one, two, or all three decks engaged, depending on the situation. The 4100-D/4110-D also features a unique, patented, parallel hydraulic traction system in forward and reverse that makes it much easier to trim around a tree or object without scuffing even while traversing a hill.

Engine

Engine Manufacturer Yanmar®
Cylinder Liners 4-cylinder
Engine Power 55 hp (41 kW)
Engine Torque, Maximum 125 ft.-lbs. (169 Nm) torque at 2,000 rpm
Displacement 127 cu. in. (2.1 liter)
Emissions EPA Tier IV Final and Stage V compliant
Cooling Liquid Cooled
Starter Key Start
Air Filter Dry, replaceable primary and safety elements

Drivetrain

Steering Power steering with dedicated power source. Steering wheel tilts to desired operator position.
Drive System 4WD

Fuel System

Fuel Type Diesel / Biodiesel

Battery

Battery 12V

Electric

Electrical System: 12-volt, 690 cold cranking amps battery, 80 amp alternator. Overload protection with automotive type fuses.

Wheels & Tires

Tires, Front Specification 26" x 12" - 12", 6-ply, Tubeless Multi-Trac
Tires, Rear Specification 20" x 10" - 10", 6-ply, Tubeless Multi-Trac

Operational

Operating Conditions Mowing Rate (Productivity): Up to 10.4 acres/hr (4.2 hectacres/hr)
Operating Speed Ground Forward / Reverse: 0 - 16.2 mph (0 - 26.1 km/h) / 0 - 8.1 mph (0 - 13 km/h) | Mowing: 0 - 8.3 mph (0 - 13.4 km/h)

Chassis

Frame Type All welded formed-steel frame with integral tie-down anchors
Dimensions Ground Following: 6" anti-scalp cups on each blade, adjustable skids, 3 anti-scalp rollers on front deck and 1 on each wing. | Cutting Unit Type/Configuration: Overall - 124" (315 cm), Center deck section - 54" (137.1 cm), Two 37" (93 cm) width of cut wings. 89" (226 cm) width of cut with one wing up.

Dimensions

Ground Clearance 6.5" (16.5 cm)
Height 85.3" (216.7 cm) with ROPS up 93.3" (237 cm) with cab | of Cut: 1" - 5" (25 mm - 127 mm) in 0.5" (13 mm) increments
Length 144" (366 cm) with decks down
Overall Width 127" (323 cm) with decks down
Transport Width 71" (180 cm) @ 2" (5 cm) HOC
Wheelbase 55.5" (140 cm)
Cutting Width 124" (315 cm)
Spindle Diameter diameter spindle shafts: 1.25" (3.17 cm) | diameter conical ductile iron housing, and 2 greaseable tapered roller bearings: 9" (22.9 cm)

Capacities

Fuel Capacity 21 U.S. gal. (79.5 L)
Hydraulic Capacity 8.75 U.S. gal. (33.1 L)
Oil capacity 8 U.S. qt. (7.6 L)

Weights

Weight 4237 lbs. (1922 kg) with full fluids

Features

Features Blade Style/Type: Rotary | Number of Blades: 7 | Hydraulic Fluid Type: Toro PX™ Extended Life Hydraulic Fluid
Construction Material, Deck Welded 0.100" (2.5 mm) high-strength steel with steel 7 and 10-gauge channel and plate reinforcements.
Cooling System Description: 8.75 gallons (33.1 liters) capacity with 10 micron remote spin-on filter. Single pass cooler, 6.3 fins per inch, Smart Cool™ variable speed radiator cooling fan with automatic (based on coolant and oil temps) and manual reversing capabilities.
Seat Type 4-way adjustable seat, right armrest travels with seat and suspension.

Product Photography