2024 Toro Reelmaster® 3555/3575 3575-D with 7" (03821)

2024 Toro Reelmaster® 3555/3575 3575-D with 7" (03821)

Swipe to View More

  • Year 2024
  • Make Toro
  • Model Reelmaster® 3555/3575
  • Engine Kubota® liquid-cooled diesel
2024 Toro Reelmaster® 3555/3575 3575-D with 7" (03821)

2024 Toro Reelmaster® 3555/3575 3575-D with 7" (03821)

2024 Toro Reelmaster® 3555/3575 3575-D with 7" (03821)

The Reelmaster® 3575-D 7-inch reel mower provides productivity, efficiency, and simplicity. The 100 inch width of cut and lighter weight makes it perfect for sports fields and fairways. This mower was designed to be over 20% lighter and much more compact than traditional Toro reel mowers. You get the performance you come to expect from Toro in a size that is not only highly maneuverable, but is also engineered to decrease turf compaction.

Features may include:

Lightweight Design
  • With a weight that is 20 percent lighter than a comparably equipped Toro 4-wheel drive reel machine, the Reelmaster 3575-D provides the ideal combination of turf friendliness and productive performance.
Quiet Operation
  • The Reelmaster 3575-D has a quiet, low noise design with only 84 dB(A) at the operator's ear & 73 dB(A) at a 25-foot drive by.
Three Wheel Design
  • The three wheel design is highly maneuverable which maximizes productivity. Smooth, turf-friendly tires significantly decrease potential for turf tear in tight turns. The 100 inch (2.5 m) cutting width and up to 7 mph (11.3 km/hr) mowing speed make the 3575-D fast and effective.
Engine Efficiency
  • Powered by a 24.8 hp (18.5 kW) Kubota diesel engine. The Reelmaster 3575-D provides plenty of power to climb hills, even while operating groomers and rear roller brushes, yet it uses less fuel per acre than a traditional fairway mower.
Superior Traction
  • The innovative Series/Parallel 3-wheel drive system provides power to at least two wheels at all times. The result is impressive traction in hilly and wet conditions, and minimal wheel slip so it’s gentle on the turf.

Engine

Cooling Liquid Cooled
Engine Kubota® liquid-cooled diesel
Engine Power 24.8 hp (18.5 kW) @ 3000 RPM
Cylinder Liners 3-cylinder
Governor @ 2200 RPM
Displacement 68.5 cu.in. (1123 cc)

Fuel System

Fuel Type Diesel / Biodiesel

Drivetrain

Drivetrain Diesel | Traction Drive: 3WD
Steering Hydraulic power steering, tilt wheel.
Drive System Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in forward and reverse.

Brakes

Parking Brake Hydrostatic service brake. Hand-operated parking brake.

Battery

Battery 12V

Electric

Electrical Frequency/Backlapping: 7" reel 1,600 rpm max reel speed, at highest setting. 200 rpm max at low idle and lowest setting for backlapping. | Cutting Unit Lift/Lower: Hydraulic - front and rear cutting unit lift/lower are sequenced for uniform starting and ending points. | System: Heavy-duty 12-volt battery, 570 CCA; 40 amp alternator/regulator. Electronic control unit is microprocessor based, solid state control unit with diagnostic capabilities.

Wheels & Tires

Tires, Front Specification 22" x 12" - 12", 4-ply, No Tread
Tires, Rear Specification 22" x 12" - 12", 4-ply, No Tread

Operational

Operating Speed Ground Speed - Forward: 0 - 10 mph (0 - 16.1 km/h) | Ground Speed - Reverse: 0 - 3.5 mph (0 - 5.6 km/h) | Mowing Speed: 0 - 7 mph (0 - 11.3 km/h)

Chassis

Frame Type Formed steel, welded steel and steel tubing.

Dimensions

Dimensions Reel Diameter: 7 in. (17.8cm)
Length 105" (266 cm)
Height 81" (206 cm) | of Cut Range: 0.25" (6.4 mm) - 1.5" (38.1 mm)
Overall Width 112" (274 cm)
Cutting Width 100" (254 cm)

Capacities

Fuel Capacity 7.5 U.S. gal. (28.4 L)

Weights

Weight 1,755 lbs. (796 kg) with no cutting units. 2,550 lbs. (1,156 kg) with (5) 5" reels, 22" width, 8-blade cutting units.

Features

Features Bedknife: Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment. | Blade Style/Type: Reel | Number of Blades: 11, 8
Construction Material Cutting Unit Type/Configuration: Five hydraulically driven, balanced, DPA cutting Units. Frame precision manufactured, die-cast aluminum for increased strength, simple click adjustment maintenance.
Gauges Hour meter, fuel gauge, diagnostic lamp, cluster gauge with glow plug and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).

Product Photography